Material-handling robots,
paid monthly
From ฿4,500 per month on a 48-month plan, including maintenance, wear parts and on-site Thai engineers. Installed with magnetic tape on your existing floor — no drilling, no line stoppage.
From site survey to the robot running in production. Magnetic-tape models need no floor changes and no line downtime.
Runtime per charge at full load, on a swappable LiFePO4 battery that recharges in 4–6 hours.
Preventive maintenance, wear parts, spare magnetic tape and engineer call-outs are all in the monthly fee.
We don't just deliver a robot
and leave you to it
Our engineers survey the site, lay the magnetic tape, configure stops in the app and train your operators before handover. During the contract we service on schedule, re-route when your layout changes, and take fault reports every working day. All documents and tax invoices are issued in Thai.
Book a free site survey →Pick a model, pick a term
A 16 cm-low chassis that slides under carts or takes your own rack or table. Moves part bins between assembly stations dozens of times a day.
The M50 with a factory rack frame, 59 cm tall. Load bins straight away with no fabrication — ideal for feeding parts to assembly lines.
Flat-top 76 × 53 cm chassis carrying 100 kg — set crates or trays straight on it. Supports branch paths so one layout can serve several routes.
200 kg payload with high-torque geared motors and ±10 mm stop accuracy. Add a 50 mm lifting unit to pick up and drop racks or carts automatically.
An 88 × 63 cm flat table carrying 300 kg — small pallets or heavy material crates. Supports branch paths and a lifting unit.
600 kg on a 98 × 68 cm table, driven by a servo motor + reducer power assembly — for pallets and heavy material carts.
The top payload at 1 tonne on the same chassis as the M600 — full pallets or heavy tooling between stores and lines.
Per unit per month, excl. 7% VAT · Down payment is paid once at contract signing · The 48-month plan is the standard price
What comes with every unit
Hub motors on the small models, high-torque reduction gearing from 200 kg up. Quiet, with no brushes to replace
UN38.3 and CE certified, about 40 h per charge. Swap in a spare pack instead of waiting to recharge
Set speed, stops, dwell time per station and task mode from a phone over Bluetooth — no PC needed
Reads marks on the tape and decelerates ahead of time, so loads don't jolt. Stops within ±10–20 mm depending on model
Park within 20–40 mm of the transmitter and charging starts by itself — nobody has to plug it in
Know at a glance whether it's running, slowing or stopped, with an audible warning while moving and a laser obstacle sensor
One chassis,
your choice of top frame
Multi-shelf racks, lipped trays, flat tops, roller conveyors or a lifting unit. Our engineers design and fit the frame to the bins, trays or carts your plant already uses, before handover
See every operating mode →
Start with a free site survey
No commitment
Send us a layout or photos of your site. Our engineers will estimate unit count, routes and monthly rent within two working days