Robots / Magnetic-tape AGV / AGV-M1000
AGV-M1000 — 1,000 kg table
Magnetic-tape AGV · Ask for pricing
AGV-M1000
A 1,000 kg AGV on a 98 × 68 cm table with the same servo + reducer power assembly as the M600, ±10 mm stop accuracy. A 24 Ah, 56 V battery gives about 10–15 h per charge at full load. Supports branch paths and a lifting unit — suited to full-pallet moves on fixed routes.
Ask for pricing
Pricing depends on quantity, term and options (branch path / lifting / RS485) — our sales team quotes within 2 working days
- ✓Site survey, magnetic-tape layout and stop configuration before handover
- ✓Scheduled preventive maintenance with wear parts (wheels, magnetic sensor, tape)
- ✓Swappable LiFePO4 battery, replaced at end of service life
- ✓Operator training on the mobile control app, with a Thai manual
- ✓Engineer on site by the next working day after a fault report
Supported operating modes
✓ Standard✓ Station Task○ 3-key remote○ Designated stop (15-key remote)○ Wireless RS485 (PLC)○ Branch path○ Lifting unit○ Wireless charging
○ Option — charged on top of the standard rent, ask our sales team · See every mode in detail →
Technical data AGV-M1000
Max payload1000 kg
Body size (L×W×H)1034 × 680 × 318 mm
Table size980 × 680 mm
Vehicle weight140 kg
DrivePower assembly: servo motor + reducer + casters
NavigationMagnetic tape — Single / loop / branch (option) · stop accuracy ±10 mm
Speed8–67 m/min (0.5–4 km/h), adjustable in app, auto-slows before stops and curves
Min. turning radius1.3 m (90° turn)
BatteryLiFePO4 24 Ah (56 V) swappable, ≈ 10–15 h at full load, 4–6 h charge
SafetyLaser obstacle sensor, collision-stop bumper, light and sound warnings
ControlMobile control app for speed, stops and dwell time per station (0–32,767 s) · Options: 3 / 15-key remote, wireless RS485
Running modesAutomatic / manual · start from either end · forward and reverse
Magnetic tape1.2 mm thick, 30 mm wide, glossy N-pole up, adhesive S-pole down onto the existing floor — no drilling
Lifting unit○ Lift unit, 50 mm stroke (ask for rating) · With 150–200 kg loads, leave more than 2 minutes between lifts so the lifting motor can cool
Status lightsRed/blue alternating = running · solid red = stopped · yellow = slowing
ChargingAC 220 V → DC 56 V 4.5 A, direct / dock / wireless 10 A (option)
Standard accessories20 m magnetic tape · 1 charger · manual · certificate of conformity
CertificationsCE · CNAS · MA · MSDS · UN38.3 (battery)
Source: manufacturer data · Suits flat concrete or epoxy floors, aisles from 1.0 m, no steep ramps · Branch path from M100 · Lifting from M200
Start with a free site survey
No commitment
Send us a layout or photos of your site. Our engineers will estimate unit count, routes and monthly rent within two working days