Robots / Magnetic-tape AGV / AGV-M200
AGV-M200 — 200 kg table
Magnetic-tape AGV · Lead time
AGV-M200
Heavy-duty 200 kg AGV driven by high-torque reduction motors with ±10 mm stop accuracy. Supports branch paths and an optional 50 mm lifting unit to slide under racks and carry them away. Suited to heavy material flows between stores and lines, and PLC integration over RS485.
฿6,000 / unit / month
Down payment ฿15,000 · Term 48 months · Total over the term ฿303,000 · excl. 7% VAT
- ✓Site survey, magnetic-tape layout and stop configuration before handover
- ✓Scheduled preventive maintenance with wear parts (wheels, magnetic sensor, tape)
- ✓Swappable LiFePO4 battery, replaced at end of service life
- ✓Operator training on the mobile control app, with a Thai manual
- ✓Engineer on site by the next working day after a fault report
Supported operating modes
✓ Standard✓ Station Task○ 3-key remote○ Designated stop (15-key remote)○ Wireless RS485 (PLC)○ Branch path○ Lifting unit○ Wireless charging
○ Option — charged on top of the standard rent, ask our sales team · See every mode in detail →
Technical data AGV-M200
Max payload200 kg
Body size (L×W×H)760 × 530 × 210 mm
Table size650 × 530 mm
Vehicle weight40 kg
DriveHigh-torque reduction brushless motor
NavigationMagnetic tape — Single / loop / branch (option) · stop accuracy ±10 mm
Speed8–58 m/min (0.5–3.5 km/h), adjustable in app, auto-slows before stops and curves
Min. turning radius1.0 m (90° turn)
BatteryLiFePO4 18.4 Ah swappable, ≈ 40 h at full load, 4–6 h charge
SafetyLaser obstacle sensor, collision-stop bumper, light and sound warnings
ControlMobile control app for speed, stops and dwell time per station (0–32,767 s) · Options: 3 / 15-key remote, wireless RS485
Running modesAutomatic / manual · start from either end · forward and reverse
Magnetic tape1.2 mm thick, 30 mm wide, glossy N-pole up, adhesive S-pole down onto the existing floor — no drilling
Lifting unit○ Lift unit 650 × 530 × 135 mm, 50 mm stroke, ≤ 200 kg · With 150–200 kg loads, leave more than 2 minutes between lifts so the lifting motor can cool
Status lightsRed/blue alternating = running · solid red = stopped · yellow = slowing
ChargingAC 220 V → DC 25.2 V 5 A, direct / dock / wireless 10 A (option)
Standard accessories20 m magnetic tape · 1 charger · manual · certificate of conformity
CertificationsCE · CNAS · MA · MSDS · UN38.3 (battery)
Source: manufacturer data · Suits flat concrete or epoxy floors, aisles from 1.0 m, no steep ramps · Branch path from M100 · Lifting from M200
Start with a free site survey
No commitment
Send us a layout or photos of your site. Our engineers will estimate unit count, routes and monthly rent within two working days